LiteOn EVO 8000 Series, Руководство пользователя

Страница: 115 / 169

112
Parameter Name Description Setting Range
U1-09=C11111111:
The following indicate each digit from right to left.
1:Digital Input 1 (S1 enabled )
1:Digital Input 2 (S2 enabled )
1:Digital Input 3 (S3 enabled )
1:Digital Input 4 (S4 enabled )
1:Digital Input 5 (S5 enabled )
1:Digital Input 6 (S6 enabled )
1:Digital Input 7 (S7 enabled )
1:Digital Input 8 (S8 enabled )
U1-10
Output Terminal
Status
Displays the status of the output terminal.
U1-10=o1111:
The following indicate each digit from right to left.
Multi-Function Terminal Output (terminal
R1A/R1B-R1C)
Multi-Function Terminal Output (terminal
R2A –R2C)
Multi-Function Photocoupler Output 1 (terminal
D1)
Multi-Function Photocoupler Output 2 (terminal
D2)
-
U1-11
Drive Operation
Status
Displays the status of the drive operation.
U1-11=11111111
The following indicate each digit from right to left.
1:During Run
1:During Zero Speed
1:During Reverse
1:During Fault Reset Signal Input
1:During Speed Agree
1:Drive Ready
1:During Alarm Detection
1:During Fault Detection
-
U1-12
Terminal A1 Input
Voltage
Displays the terminal A1 input voltage. 0.1%
U1-13
Terminal A2 Input
Voltage
Displays the terminal A2 input voltage. 0.1%
U1-14
<7>
Output frequency
after soft start
Display the output frequency after soft start
Display the frequency at which the compensation
function such as slip compensation does not work
0.01Hz
U1-15 Input Pulse Monitor Displays the frequency to pulse input. 1Hz
U1-16 Software Version Displays the software version. -
U1-17 Date code Display software Date code
U1-18
PG Card Software
Version
Displays the PG card software version.