LiteOn EVO 8000 Series, Руководство пользователя

Страница: 41 / 169

38
4.2.2.4 Ground Terminal

Use grounding cables of dimensions regulated by electrical equipment standard. Shrink wiring
distance to prevent leakage current resulting unstable electrical potential at the terminal
distant from grounding terminal.

Do not use share the same grounding cable with welding machines or any device requiring
large current. Failure to comply could cause drive or equipment malfunction.

Do not wind the grounding cable when multiple drives are installed. Failure to comply could
cause drive or equipment malfunction.

Ensure the neutral of the input side and drive terminal " “ are grounded according to
the local electrician regulations. TN and TT system are suggested for the drive primary side.
4.2.2.5 Short circuit

This product is declared in accordance with EN 61800-5-1 (2007), meets LVD requirements, and
is tested in accordance with IEC 60990 (1999). The touch current does not exceed 10 mA DC.

If you need to further reduce the leakage current, please follow the steps below to remove the
short circuit.

Removing the shorting bar may affect electromagnetic interference and immunity.