LiteOn EVO 8000 Series, Руководство пользователя

Страница: 67 / 169

64
Parameter Name Description Setting Range
A2-12 E2-01 Relay2function selection
A2-13 E3-00 Analog A1 input signal
A2-14 E3-01 Analog A1 function
A2-15 E3-06 Analog A1 function
A2-16 E3-07 Analog A2 function
A2-32
User-Defined
Parameter
Automatic Save Saves the most recently edited parameters.
0: Do not save list of recently edited parameters
1: Save list of recently edited parameters
Default: 0
Range: 0, 1
Group b, Application
b1: Operation Mode Selection
b1-00
Frequency
Command Selection
1
0
∶
Keypad
1
∶
Control Circuit Terminal (Analog Input)
2
∶
Terminal Up/Down
3
∶
Modbus Communication
4
∶
Pulse Train Input (Including PWM signal input)
5 : Reserved
6 : CANOpen
Default
∶
0
Min.: 0
Max.: 6
b1-01
Run Command
Selection 1
0
∶
Keypad
1
∶
Control Circuit Terminal (Sequence Control
Input)
2
∶
Modbus Communication
3: Expansion card
Default
∶
0
Min.: 0
Max.: 3
b1-02
Stopping Method
Selection
0
∶
Ramp to Stop
1
∶
Coast to Stop
2
∶
DC Braking to Stop
3
∶
Coast to Stop with Timer
Default
∶
0
Min.: 0
Max.: 3
b1-03
Reverse Rotation
Selection
0: Reverse Rotation Enabled
Drive accepts a run command of both forward
and reverse directions
1: Reverse Rotation disabled
Drive can accept only run command of
forward direction
Default: 0
Range: 0, 1
b1-04
<9>
Zero speed
operation
When the frequency command is lower than the
set value of d1-08, and the running command still
exists, when the motor decelerates and is lower
than the set value of d1-08, the zero speed
operation is performed.
Default: 0
Range: 0, 1
b1-05 Run Command 0: Ignore Active Run Command at the New Source Default
∶
0