6. Software Control – Lightware Device Controller Software
MX-FR Series Modular Matrix Frames – User's Manual
91
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
6.5.5.
Presets
Preset operations can be done in the Crosspoint submenu on the
Preset tab. Each Lightware matrix router has 32 preset memories that
can be loaded and saved at any time.
#preset
INFO:
A preset setting stores a full configuration of all outputs, so
preset loading has an effect on every output, except the locked
ones.
A preset can be selected by pressing its button on the left. Preset
preview (on the right) will show the crosspoint settings of input and
output ports.
Loading a Preset
Step 1.
Select the
Presets
tab from the Crosspoint menu.
Step 2.
Select the
preset memory
(Preset1... Preset32) you want to load.
Step 3.
Press the
Load
button below the Preset preview list. Now the
preset is loaded.
Step 4.
The new I/O configuration is displayed in Grid view.
Saving a Preset
Step 1.
Make the desired crosspoint connections in Tile view or Grid
view.
Step 2.
Select the
preset memory
(Preset1...Preset32) where you want
to save your current crosspoint connections.
Step 3.
Press the
Save
button below the Preset preview list.
Step 4.
A confirmation message is displayed on the information bar;
the preset is stored.
Renaming a Preset
Step 1.
Select the
preset memory
(Preset1...Preset32) you want to
rename.
Step 2.
Type the desired name and press the
Rename Preset
button; the
new name is stored.
Presets Tab
