7. Programmer’s Reference
MX-FR Series Modular Matrix Frames – User's Manual
113
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
7.7.3.
Setting the CPU Time
This command allows setting the built-in real time clock on the CPU2 board.
Command and Response
ȩ
{SETTIME=
<date>
•
<time>
•UTC+
<zone>
}
Ȩ
(
<date>
•
<time>
•UTC+
<zone>
)CrLf
Parameters
The UTC, and therefore the processor time do not observe daylight saving. E.g., the Central European Time
is UTC+1 during winter and UTC+2 during summer. The CPU time is used mainly as a timestamp in the error
log.
Identifier
Parameter description
<
date
>
Date in DD.MM.YYYY. format
<
time
>
Time in HH:MM:SS format
<
zone
>
Time zone related to UTC (Universal Coordinated Time) in HHMM format.
Example
ȩ
{settime=15.10.2012. 16:52:34 UTC+0100}
Ȩ
(15.10.2012. 16:52:34 UTC+0100)CrLf
INFO:
The MX-CPU2 board has a CR2032 button battery, which supplies power to the clock when the
matrix is not powered on.
7.7.4.
Switching the Matrix to Standby
DIFFERENCE:
This command works only in the MX-FR80R and MX-FR65R. The frame can be switched to
standby without unplugging the power. The CPU can still communicate.
Command and Response
ȩ
{PWR_
<state>
}
Ȩ
(Powered
<state>
)CrLf
Parameters
The
<state>
parameter can be OFF or ON.
Example
ȩ
{pwr_off}
Ȩ
(Powered off)CrLf
INFO:
The I/O boards do not get any power when in standby mode. The CPU will still work and respond
only for status commands.
7.7.5.
Reloading the Factory Default Values and Settings
DIFFERENCE:
This function has been heavily modified in MX-CPU2 compared to CPU1.
Factory default settings can be reloaded for different functions separately. Multiple functions can be entered.
Command and Response
ȩ
{FACTORY=
<f1>
;
<f2>
;…;
<fx>
}
Ȩ
(FACTORY•
<f1>
…)CrLf
Ȩ
(FACTORY•
<f2>
…)CrLf
Ȩ
…
Ȩ
(FACTORY•
<fx>
…)CrLf
Parameters
<f1>
,
<f2>
are the names of the functions that need to be reset to factory default. Any number of
<fx>
can be
entered, separated by semicolons.
Example
ȩ
{factory=xpoint;iocards;edids}
Ȩ
(FACTORY XPOINT…)CrLf
Ȩ
(FACTORY IOCARDS…)CrLf
Ȩ
(FACTORY EDIDS…)CrLf
Factory default settings are reloaded for crosspoint and I/O card configurations and emulated EDIDs. The
response may contain additional messages as the router makes the configurations. These responses can
be omitted.
INFO:
After resetting the needed parameters, the matrix restarts.
