7. Programmer’s Reference
MX-FR Series Modular Matrix Frames – User's Manual
139
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
7.10.10.
DVI-OPT Output Port
Query or set the DVI-OPT output port parameters.
Supported Boards
▪
MX-DVI-OPT-OB
7.10.10.1.
Port Parameters and Settings
Querying the Parameters
Command and Response
ȩ
{:TOSA#
<out>
@
<S/C/A>
O=?}
Ȩ
(TOSA#
<out>
@SO=
<laser>
;
<opt_cod>
;)CrLf
Example
ȩ
{:TOSA#9@SO=?}
Ȩ
(TOSA#9@SO=1;C;4TCDP1081BT;LC;30;31;26;31;22;24;22;24;3;2;0)CrLf
The actual setting is in the response, see the legend.
Setting the Parameters
Command and Response
ȩ
{:TOSA#
<out>
@
<S/C/A>
O=
<laser>
;}
Ȩ
(TOSA#
<out>
@SO=
<laser>
;
<opt_cod>
;)CrLf
Example
ȩ
{:TOSA#9@SO=?}
Ȩ
(TOSA#9@SO=1;C;4TCDP1081BT;LC;30;31;26;31;22;24;22;24;3;2;0)CrLf
The Laser has been enabled, the others were left unchanged.
Parameters
Identifier
Parameter Description
Parameter Values
<
laser
>
Laser beam setting
0
= disable laser
1
= enable laser
<
opt_cod
> Optical module-related parameters for internal use
7.11.
RICOD Related Commands
7.11.1.
Setting the RICOD MASTER Command
Sets the RICOD command for the selected input port.
Command and Response
ȩ
{:RICOD#
<in>
@
<S/A>
I=
<A1><A2>
;
<B>
;
<C>
;}
Ȩ
(RICOD#
<in>
@SI=
<A1><A2>
;
<B>
;
<C>
;)CrLf
Parameters
Identifier
Parameter Description
Parameter Values
<
in
>
Input port number
Input number in 1 or 2 digit ASCII format (01, 3, 04 etc.)
<
S/A
>
Affected ports
S
= single selected input
A
= all inputs
<
A1
>
RICOD enable parameter on
the input
1
: The RICOD function is enabled to this input port on the
local device (where the command was given).
0
: The RICOD function is disabled to this input port on the
local device (where the command was given).
<
A2
>
Remote lock enable parameter
(it takes effect only if RICOD is
enabled by <A1>)
1
: The front panel buttons (of a transmitter) or the output
(of a video matrix) is locked on the remote device.
0
: The front panel buttons (of a transmitter) or the output
(of a video matrix) is unlocked on the remote device.
<
B
>
The selected video input
-
(hyphen) = There is no video switch command.
A
= Automatic input select must be performed on the
remote device if available. (i.e. Autoselect function)
0
(zero) = The output needs to be muted if available.(switch
to zero)
1 , 2 , ... , 80
: Use the given input number if available.
<
C
>
The selected audio input
-
(hyphen) = There is no video switch command.
A
= Automatic input select must be performed on the
remote device if available. (i.e. Autoselect function)
0
(zero) = The output needs to be muted if available.
1, 2, ... , 80
: Use the given input number if available.
INFO:
If the first character of
<A1><A2>
is zero, then no command is sent, the RICOD function is disabled
on this input .
Example
ȩ
{:ricod#1@SI=10;2;1;}
Ȩ
(RICOD#1@SI=10;2;1;)CrLf
RICOD control is enabled on the first input port, which unlocks the remote device and selects the second
video input and the first audio input port on it.
