7. Programmer’s Reference
MX-FR Series Modular Matrix Frames – User's Manual
138
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
7.10.8.2.
Input Port Parameters
Query or set the analog audio input port parameters (signal levels).
Supported Boards
▪
MX-TPS-IB-A, -AP; MX-TPS-OB-A, -AP
▪
MX-4TPS2-4HDMI-IB-A; MX-4TPS2-4HDMI-IB-AP
▪
MX-HDMI-3D-IB-A; MX-HDMI-3D-OB-A
▪
MXD-UMX-IB
Querying the Parameters
Command and Response
ȩ
{:AUDIN#
<in/out>
@
<S/C/A><I/O>
=?}
Ȩ
(AUDIN#
<in/out>
@S
<I/O>
=
<vol>
;
<bal>
;
<gain>
;
<ph>
;
<res>
;)CrLf
Example
ȩ
{:AUDIN#9@SI=?}
Ȩ
(AUDIN#9@SI=6300;50;0;0;0;)CrLf
The actual setting is in the response; see the legend for the details.
Setting the Parameters
Command and Response
#analogaudio #volume
ȩ
{:AUDIN#
<in/out>
@
<S/C/A><I/O>
=
<vol>
;
<bal>
;
<gain>
;
<ph>
;x}
Ȩ
(AUDIN#
<in/out>
@S
<I/O>
=
<vol>
;
<bal>
;
<gain>
;
<ph>
;
<res>
;)CrLf
Example
ȩ
{:AUDIN#9@SI=0}
Ȩ
(AUDIN#9@SI=0;50;0;0;0;)CrLf
The 'Volume' is changed to 0 dB, the others are left unchanged.
#gain
Parameters
Identifier
Parameter Description
Parameter Values
<
vol
>
Volume level
Values are accepted between
-63 and 0 dB
(step is 1
dB) and rounded. e.g. 6000 = -60 dB; 3625 = -36 dB
<
bal
>
Balance
Values are accepted between
0 and 100
(step is 1):
e.g. 50 = center (default)
<
gain
>
Gain (input volume level) Accepted values:
0, 3, 6, 9, 12, 15, 18, 21, 24
<
ph
>
The phase invert of the
outgoing signal
0
= disabled
1
= enabled
<
res
>
Reserved
7.10.9.
DVI-DL Output Port
Query or set the dual-link DVI output port parameters.
Supported Boards
▪
MX-DVIDL-OB
7.10.9.1.
Port Parameters and Settings
Querying the Parameters
Command and Response
ȩ
{:ISL54105#
<out>
@
<S/C/A>
O=?}
Ȩ
(ISL54105#
<out>
@SO=
<curr>
;
<preemp>
;
<band>
;
<mode>
;)CrLf
Example
ȩ
{:ISL54105#9@SO=?}
Ȩ
(ISL54105#9@SO=7;15;2;2;)CrLf
The actual setting is in the response.
Setting the Parameters
Command and Response
ȩ
{:ISL54105#
<out>
@
<S/C/A>
O=x;x;x;
<mode>
}
Ȩ
(ISL54105#
<out>
@SO=
<curr>
;
<preemp>
;
<band>
;
<mode>
;)CrLf
Example
ȩ
{:ISL54105#9@SO=x;x;x;0}
Ȩ
(ISL54105#9@SO=7;15;2;0;)CrLf
The DVI port mode is changed to Dual link mode, the are others left unchanged. Use the 'x' character to keep
the actual value of a parameter.
Parameters
Identifier
Parameter Description
Parameter Values
<curr>
Output level
Port-related parameters (internal use)
<preemp>
PreEmphasis
<band>
PLL bandwidth
<mode>
DVI port mode (DL/SL)
0
= Dual-link mode is active
1
= Sinlge-link mode is active
2
= Auto mode (the dual-link half controlled
automatically depending on the input signal)
The first three parameters are for internal use, type 'x' character instead and set the desired DVI port mode
by the fourth parameter.
