4. Operation
MX-FR Series Modular Matrix Frames – User's Manual
55
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
The
Add-on source
setting is accessible only with the MXD-UMX-IB. The
analog stereo and S/PDIF conversion functions can be set here. Two
signal conversions are shown.
S
represents the S/PDIF port,
An
represents
the analog stereo port and
D
represents the digital audio, which is
embedded in the HDMI signal on the video port. Possible options are
shown below:
#analogaudio #audio
The
Analog audio Input
submenu contains settings like volume, balance,
etc. for the analog stereo audio port when it is configured as an input.
Available only at the MXD-UMX-IB
.
The
Analog audio Output
submenu contains settings like volume, balance,
etc. for the analog stereo audio port when it is configured as an output.
Available only at the MXD-UMX-IB.
Input 2 settings
~Add-On Source ~
~ An->D;An->S ~
Analog Audio Input
Input 2 settings
Add-On Source
An->D;An->S
~Analog Audio Inpu>>
Analog
S/PDIF
An->D;An->S
HDMI deembedded
from input port
HDMI embedded
to crosspoint
x
Analog
S/PDIF
An->D;D->S
HDMI deembedded
from input port
HDMI embedded
to crosspoint
Analog
S/PDIF
D->An;S->D
HDMI deembedded
from input port
HDMI embedded
to crosspoint
Analog
S/PDIF
S->D;S->An
HDMI deembedded
from input port
HDMI embedded
to crosspoint
x
Analog
S/PDIF
D->S;D->An
HDMI deembedded
from input port
HDMI embedded
to crosspoint
x
LCD legend
Connections
Input 2 settings
An->D;An->S
Analog Audio Input
~Analog Audio Outp>>
Input Port Settings Submenu (DVIDL type)
Supported Boards: MX-DVIDL-IB
The input cable equalization can be set to
3, 9, 25, 35, 40 dB,
or
Auto
. Use the
left
◄
and
right
►
buttons to change the value.
Input Port Settings Submenu (3G-SDI type)
Supported Boards: MX-3GSDI-IB
Use the
up
▲
and
down
▼
buttons to select the parameter to be changed.
Use the
left
◄
and
right
►
buttons to change the value.
The
Equalization
can be set to
Auto
(recommended) or
0 dB
. The later setting
disables equalization.
The
Audio source
selects the audio signal that is embedded in the forwarded
HDMI stream: it can be set to
SDI, S/PDIF
or
No audio
.
The
Video mode
sets the signal type to DVI or HDMI mode, which is sent
towards the matrix crosspoint. The
Audio dependent
mode sends HDMI
signal to the crosspoint if the audio source is set to embed audio from SDI
or S/PDIF. The
Frame compatible
mode sets the signal type according to the
output board types in the matrix frame. If there are only HDMI compatible
output boards, then the signal type will be HDMI.
The incoming SDI embedded audio channels can be rearranged and
allocated to HDMI audio channels. The channel allocation preset can
be selected with the
Aud.Preset
setting. SDI audio allocation presets are
common for all SDI input ports in the matrix.
Input 8 settings
~Equalization ~
~< 9 dB >~
Input 17 settings
~Equalization ~
~< Auto >~
Audio source
Input 17 settings
~Audio source ~
~<SDI >~
Video mode
Input 17 settings
~Video mode ~
~<Audio depend. >~
Aud.Preset
Input 17 settings
Audio depend.
~Aud.preset ~
~<FACT1 >~
