Lexmark Pro5500 Series, Руководство по обслуживанию

Страница: 19 / 277

General information
1-5
4447-20x
Go Back
Previous
Next
Power and electrical specifications
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
Values are subject to change. Visit www.lexmark.com for current values.
Sleep Mode
This product is designed with an energy-saving mode called the Sleep Mode . The Sleep Mode saves energy by
lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged
after this product is not used for a specified period of time, called the
Sleep Mode Timeout .
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes.
Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response
time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more
energy.
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product
power consumption, disconnect the power supply cord from the wall outlet.
Mode Description
Power consumption
(Watts)
Print The product is generating hard-copy output from electronic
inputs. 37.68 W
Copy The product is generating hard-copy output from hard-copy
original documents. 35.31 W
Scan The product is scanning hard-copy documents. 18.66 W
Ready The product is waiting for a print job. 12.37 W
Sleep Mode The product is in a high-level energy-saving mode. 5.74 W
Off The product i plugged into an electrical outlet, but the power
switch is turned off. 0.52 W
Factory default Sleep Mode Timeout for this product (in minutes): 60