Lexmark Pro5500 Series, Руководство по обслуживанию

Страница: 142 / 277

3-5
Service Manual
4447-20x
Go Back
Previous
Next
Accessing the service menus
The service menus can be accessed during POR to identify problems with the printer. To access them, perform
the following:
1.
Turn on the printer.
2.
Wait for approximately 10 seconds.
3.
When lights up, touch and hold it.
4.
When lights up, release .
The printer can be set to always restart to Manufacturing mode. See “Manufacturing Mode” on page 3-12 .
Configuration Menu
The Configuration Menu group consists of menus, settings and operations that are used to configure a printer
for operation.
To access the Configuration Menu:
1.
Bring the printer up to Manufacturing mode. See “Accessing the service menus” on page 3-5 .
2.
From the home screen touch > Configuration Menu
Available options
USB Scan to Local
This setting allows the user to configure the USB device driver to enumerate as a USB composite or simple
device.
To change this setting:
1.
From the Configuration Menu, navigate to USB Scan to Local .
2.
Select On or Off .
3.
Touch to save the setting, or touch to return to the Configuration Menu without saving any
changes.
USB Scan to Local See “USB Scan to Local” on page 3-5 .
Format Fax Storage See “Format Fax Storage” on page 3-6 .
ADF Edge Erase See “ADF Edge Erase” on page 3-6 .
FB Edge Erase See “FB Edge Erase” on page 3-6 .
Disable Scanner See “Disable Scanner” on page 3-6 .
USB Speed See “USB Speed” on page 3-6 .
Edge to Edge Printing See “Edge to Edge Printing” on page 3-7 .
Media Card Slots See “Media Card Slots” on page 3-7 .
PictBridge Port See “PictBridge Port” on page 3-7 .