Lexmark Optra S 1250, Руководство пользователя

Страница: 165 / 427

149
Using Print Materials
Using
P
rint
Materials
Using Your Printer
5
Place the paper into the paper tray with the recommended
print side face down and the bottom edge going in first
toward the paper length guide.
Do not overload. Use the
paper capacity mark and the top edge of the length guide
as a reference for filling the tray.
When the paper is loaded into the tray, the paper is stacked
at an angle. The paper tray wall at the front of the tray is
angled as this cross-section of the tray illustrates. If you
readjust the length guide lever once the paper is in the tray,
do not push it too far. Pushing the length guide too far
causes the paper to move up along this angled wall and
jam.
Note: If you set the Paper Size to Universal for odd paper sizes,
you need to move the length guide until the leading edge of
the paper looks angled against the paper tray wall.