Lexmark Optra S 1250, Руководство пользователя

Страница: 103 / 427

87
Using the Operator Panel and Menus
Using
the
Operator
Panel
a
nd
Menus
Using Your Printer
Setup Menu
Setup Menu Selections
Menu Item Values and Functions of the Menu Items
Printer Language PCL Emulation*
PS 2 Emulation
The printer language defines how the computer communicates with the
printer. Your computer uses printer languages to send print data to the
printer, such as PCL emulation and PostScript Level 2 emulation. You can
select one as the default printer language. However, setting one as the
default does not restrict the software application from sending print jobs
that use the other printer language.
Power Saver Disabled
1 to 120 (20*)
The Power Saver menu item lets you reduce power usage when the printer
is idle. The
Power Saver setting determines the length of time the printer
waits after a job is printed before it goes to a reduced power state. Press
Go
to take the printer out of Power Saver.
If your printer is used constantly, select Disabled which keeps the printer
ready to print with the minimum warm-up time. This uses more energy to
keep the printer warm and ready to print.
If your printer is in an environment where it shares an electrical circuit with
room lighting and you notice lights flickering, you may set
Power Saver
to
1 , so the printer goes to Power Saver mode one minute after the end of the
print job. This uses much less energy, but requires more warm-up time for
the printer.
If you want a balance between energy consumption and keeping the printer
ready to print quickly, select a Power Saver time between 1 to 120 minutes.
* Factory Default