Lexmark Optra S 1250, Руководство пользователя

Страница: 130 / 427

Using the Operator Panel and Menus
114
Using
the
Operator
Panel
a
nd
Menus
Using Your Printer
NPA Mode Off
Auto*
NPA is a mode of bidirectional communication that follows the Network
Printing Alliance Protocol, A Printer/Host Control Specification Developed by the
NPA. This mode requires the printer to perform special processing of the
data. The NPA Mode menu item under the INFRARED MENU only applies
to the specified infrared interface connection.
If NPA Mode is set Off , the printer does not perform any NPA processing. If
NPA Mode
is set to
Auto
, the printer examines the data to determine the
format and then processes it in either format.
Changing the NPA Mode setting automatically resets the printer.
Infrared Buffer Disabled
Auto*
5K to maximum size allowed
Your printer has a variable buffer size that can be changed from the
operator panel. You can configure the size of the input port buffers to meet
your system needs. The maximum size available for modification depends
on the amount of memory in your printer, the size of the other link buffers,
and if the
Resource Save
setting is
On
or
Off
. To maximize the range for
the Infrared Buffer size, you can disable or reduce the size of the parallel,
serial, network, Fax, and LocalTalk buffers. The Auto setting indicates the
printer selects the buffer size based on the total memory available.
Changing the Infrared Buffer setting automatically resets the printer.
Job Buffering Off*
On
The Job Buffering menu item does not display if the formatted hard disk
is defective, is Read/Write or Write protected, or if the Job Buffer Size is set
to Disabled.
61 Defective Disk displays during printer power on. See 61
Defective Disk
on page 189 for more information. Also, see Job Buffer Size
on page 93.
Job buffering lets you delay processing of a print job. The job is temporarily
stored on an optional hard disk before being printed. This usually frees the
host computer during the actual printing of a print job.
If Job Buffering is set On , print jobs are buffered to the hard disk. If Job
Buffering is set Off , the print jobs are not buffered.
Changing the Job Buffering setting automatically resets the printer.
Infrared Menu Selections (Continued)
Menu Item Values and Functions of the Menu Items
* Factory Default