Lexmark M1100 Series Скачать руководство пользователя страница 191

Страница: 191 / 246

Too many ﬂash options installed [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra ﬂash memory.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Too many trays attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra trays.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Unformatted ﬂash detected [53]

Try one or more of the following:

•

From the printer control, select

Continue

to stop the defragmentation and continue printing. For

non

‑

touch

‑

screen printer models, press

to conﬁrm.

•

Format the ﬂash memory.

Note:

If the error message remains, then the ﬂash memory may be defective and need to be replaced.

Unsupported option in slot [x] [55]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the unsupported option card from the printer controller board, and then replace it with a
supported card.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Weblink server not set up. Contact system administrator.

Select

Continue

to clear the message. For non

‑

touch

‑

screen printer models, press

to conﬁrm.

Note:

If the message appears again, then contact your system support person.

Troubleshooting

191

Содержание M1100 Series























































































































































































































































Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды

Lexmark M1100 Series, Руководство пользователя

Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды