Lexmark M1100 Series Скачать руководство пользователя страница 200

Страница: 200 / 246

Action

Yes

Step 4

Check if the ﬂash drive is supported.

For more information regarding tested and approved USB ﬂash
memory devices, see

“Supported ﬂash drives and ﬁle types” on

page 90

Is the ﬂash drive supported?

Go to step 5.

Use a supported
ﬂash drive.

Step 5

Check if the USB slot is disabled by the system support person.

Is the USB slot disabled?

Contact your system
support person.

Contact

customer

support

Print jobs do not print

Action

Yes

Step 1

From the document you are trying to print, open the Print dialog
and check if you have selected the correct printer.

Note:

If the printer is not the default printer, then you must

select the printer for each document that you want to print.

Resend the print job.

Do the jobs print?

The problem is
solved.

Go to step 2.

Step 2

Check if the printer is plugged in and turned on, and if

Ready

appears on the printer display.

Resend the print job.

Do the jobs print?

The problem is
solved.

Go to step 3.

Step 3

If an error message appears on the printer display, then clear the
message.

Note:

The printer continues to print after clearing the message.

Do the jobs print?

The problem is
solved.

Go to step 4.

Step 4

Check if the ports (USB, serial, or Ethernet) are working and if
the cables are securely connected to the computer and the
printer.

Note:

For more information, see the setup documentation

that came with the printer.

Resend the print job.

Do the jobs print?

The problem is
solved.

Go to step 5.

Troubleshooting

200

Содержание M1100 Series























































































































































































































































Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды

Lexmark M1100 Series, Руководство пользователя

Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды