Lexmark M1100 Series Скачать руководство пользователя страница 195

Страница: 195 / 246

Action

Yes

Step 4

Check if the internal option is selected.

It may be necessary to manually add the internal option in the
printer driver to make it available for print jobs. For more
information, see

“Adding available options in the print driver”

on page 28

Resend the print job.

Does the internal option operate correctly?

The problem is
solved.

Contact

customer

support

Tray problems

Action

Yes

Step 1

Open the tray and do one or more of the following:

•

Check for paper jams or misfeeds.

•

Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.

•

If you are printing on custom

‑

size paper, then make sure

that the paper guides rest against the edges of the paper.

•

Make sure the paper is below the maximum paper ﬁll
indicator.

•

Make sure paper lies ﬂat in the tray.

Check if the tray closes properly.

Is the tray working?

The problem is
solved.

Go to step 2.

Step 2

Turn off the printer, then wait about 10 seconds, and then turn
the printer back on.

Resend the print job.

Is the tray working?

The problem is
solved.

Go to step 3.

Step 3

Check if the tray is installed.

Print a menu settings page, and then check if the tray is listed
in the Installed Options list.

Is the tray listed in the menu settings page?

Go to step 4.

Reinstall the tray. For
more information,
see the setup
documentation that
came with the tray.

Troubleshooting

195

Содержание M1100 Series























































































































































































































































Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды

Lexmark M1100 Series, Руководство пользователя

Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды