Lexmark M1100 Series Скачать руководство пользователя страница 89

Страница: 89 / 246

Printing from a mobile device using Lexmark Print

Lexmark Print allows you to send documents and images directly to a Lexmark device.

Open the document, and then send or share the document to Lexmark Print.

Note:

Some third

‑

party applications may not support the send or share feature. For more information, see

the documentation that came with the application.

Select a device.

Print the document.

Printing from a ﬂash drive

Notes:

•

Before printing an encrypted PDF ﬁle, you will be prompted to type the ﬁle password from the printer
control panel.

•

You cannot print ﬁles for which you do not have printing permissions.

Insert a ﬂash drive into the USB port.

Notes:

•

A ﬂash drive icon appears on the printer home screen when a ﬂash drive is inserted.

•

If you insert the ﬂash drive when the printer requires attention, such as when a jam has occurred,
then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears. After

these print jobs are processed, you may need to view the held jobs list to print documents from the
ﬂash drive.

Warning—Potential Damage:

Do not touch the printer or the ﬂash drive in the area shown while actively

printing, reading, or writing from the memory device. Loss of data can occur.

Using M3150

Содержание M1100 Series























































































































































































































































Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды

Lexmark M1100 Series, Руководство пользователя

Результаты поиска

Содержание M1100 Series

Отзывы:

Похожие инструкции для M1100 Series

Бренды по названию

Популярные бренды