Lexmark 12L0103, Справочник

Страница: 47 / 248

33
Tr
oubleshooting
Large jobs do
not collate. The job is too
complex. Reduce the complexity of the print job
by eliminating the number and size of
fonts, the number and complexity of
images, and the number of pages in
the job.
Add printer memory or a hard disk
option.
Refer to the
Complete Printer
Reference on Lexmark’s Web site for
information on managing printer
memory and selecting memory options
to install.
Unexpected
page breaks
occur. The job has timed
out. Set Print Timeout to a higher value
from the Setup Menu.
The printer
generates an
unusual motor
noise that lasts
up to three
minutes. The printer is trying
to determine if there
is toner remaining
in the toner
cartridge. If Replace Toner appears on the
display, replace the toner cartridge.
See “Installing a toner cartridge” on
page 111.
If no message is displayed and you
just inserted a new toner cartridge, the
printer may be transporting toner into
the photoconductor cartridge. The
motor noises should cease in three
minutes or less.
An option does
not operate
correctly after it
is installed, or it
stops working. Communication has
failed between the
printer and the
option. Turn the printer off, wait about 10
seconds, and turn the printer back on.
The option is not
set up correctly. Turn the printer off and check the
connection between the option and the
printer. Refer to the
Setup Guide for
complete installation instructions.
The printer driver
does not recognize
that the option is
installed. Your printer driver may not automat-
ically recognize that an option is
attached to your printer. Open the
driver and verify that all the printer
configuration settings are correct.
Other printing problems (continued)
Symptom Cause Solution