Lexmark 12L0103, Справочник

Страница: 45 / 248

31
Tr
oubleshooting
Jobs don’t print
(
continued).
Your MarkNet
™
print server is not
set up properly or is
not connected
properly.
Verify that you have properly set up the
network address and that the network
cable is securely connected.
Refer to the
Setup Guide or to the
Drivers, MarkVision and Utilities CD for
information. After launching the CD,
click
View Documents and then click
MarkNet Print Servers .
Port settings are
incorrect. Make sure the current communications
settings are correct. Refer to the
Setup
Guide for information on configuring
MarkNet ports. Refer to the
Complete
Printer Reference on Lexmark’s Web
site for information on parallel, serial,
fax, or LocalTalk port settings.
You are using the
wrong interface
cable, or the cable is
not securely
connected. Make sure you are using a recom-
mended printer cable. Refer to the
Setup Guide for cable specifications.
It takes longer
than expected
to print a job. The job is too
complex. Reduce the complexity of your print job
by eliminating the number and size of
fonts, the number and complexity of
images, and the number of pages in
the job.
Page Protect is On. Set Page Protect Off from the Setup
Menu.
The resolution is set
to 1200 Image
Quality. If your job includes complex images, it
may take longer to print when the
resolution is set to 1200 Image Quality.
To print the job faster, select another
print resolution from the printer driver
before sending the job to print. You
may notice some reduction in print
quality.
The job prints
from the wrong
tray or on the
wrong print
material. The printer driver
settings are
overriding the
operator panel
menu settings. Make sure the Paper Size and Paper
Type specified in the printer driver are
correct for the job you are printing.
Other printing problems (continued)
Symptom Cause Solution