Lexmark 12L0103, Справочник

Страница: 35 / 248

21
Tr
oubleshooting
Print too light The Print Darkness
setting is too light. Select a different Print
Darkness setting from the
printer driver before sending
the job to print.
Toner Saver is on. Turn Toner Saver off from the
printer driver before sending
the job to print.
You are using media
that does not meet the
printer specifications. • Use recommended paper
and other media. Refer to
the
Complete Printer
Reference on Lexmark’s
Web site for detailed
specifications.
• Load media from a new
package.
• Avoid textured paper with
rough finishes.
• Make sure the paper you
load in the trays is not damp.
The toner cartridge is
empty. Replace the toner cartridge.
See “Installing a toner
cartridge” on page 111.
The printer is shifting
toner from the toner
cartridge to the photo-
conductor cartridge. If you just installed a new toner
cartridge, the printer may be
filling the toner reservoirs in the
photoconductor cartridge. You
may also hear motor noises
while this procedure occurs.
Normal printing should resume
in three minutes or less.
The photoconductor
cartridge is defective or
has been installed in
more than one printer. Replace the photoconductor
cartridge.
See “Replacing the photocon-
ductor cartridge” on page 117.
Print quality problems (continued)
Symptom Cause Solution