Lenovo ThinkCentre M79 Скачать руководство пользователя страница 90

Страница: 90 / 186

• Ensure that the hard disk drive your computer starts from is listed as the first startup device in the Setup

Utility program. Refer to “Selecting a startup device” on page 66.

Note:

In rare cases, the hard disk drive with the operating system might get corrupted or damaged. In such

cases, you might need to replace the hard disk drive. Refer to “Replacing the hard disk drive” on page 114.

If these actions do not correct the problem, run the diagnostic program Lenovo Solution Center. See
“Lenovo Solution Center” on page 88.

Problems with the keyboard or mouse

This section provides solutions to keyboard-related and mouse-related problems.

Keys on the keyboard do not work

Solutions:

• Connect the keyboard cable to a USB connector or PS/2 keyboard connector.

• If you are using a USB keyboard, enable the USB connectors in the BIOS settings. For more information,

see “Enabling or disabling a device” on page 65.

• If you are using an Enhanced Performance USB keyboard, use the help system in the Enhanced

Performance Customization Keyboard program to help diagnose problems.

To open the Enhanced Performance Customization Keyboard program, do one of the following:

– On Windows 7:

1. Click

Start

➙

Control Panel

2. Click

Hardware and Sound

3. Click

Devices and Printers

4. Double-click

USB Enhanced Performance Keyboard

– On Windows 8.1:

1. Open Control Panel. For more information, see “Accessing Control Panel on the Windows 8.1

operating system” on page 51.

2. Click

Hardware and Sound

3. Click

Devices and Printers

4. Double-click

USB Enhanced Performance Keyboard

The mouse does not work

Solutions:

• Connect the mouse cable to a USB connector or PS/2 mouse connector.

Note:

Depending on your keyboard, integrated USB connectors might be available to be used to

connect a USB mouse.

• Install the device drivers for the mouse.

• If you are using a USB mouse, enable the USB connectors in the BIOS settings. For more information,

see “Enabling or disabling a device” on page 65.

The pointer on the screen does not move smoothly with the mouse

Solution: Clean the mouse. For more information, see “Optical mouse” on page 75.

The fingerprint reader on the keyboard does not work

Solutions:

ThinkCentre M79 Hardware Maintenance Manual

Содержание ThinkCentre M79


























































































































































































Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды