Lenovo ThinkCentre M79 Скачать руководство пользователя страница 154

Страница: 154 / 186

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 151.

Replacing the Wi-Fi units

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

The Wi-Fi units include a Wi-Fi adapter card, a Wi-Fi card module, and a rear Wi-Fi antenna cable.

Replacing the Wi-Fi units involves the following operations:

•

“Removing the Wi-Fi adapter card” on page 146

•

“Removing the Wi-Fi card module” on page 147

•

“Installing the Wi-Fi units” on page 148

Removing the Wi-Fi adapter card

To remove the Wi-Fi adapter card, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 105.

3. If your computer comes with a Wi-Fi card module that supports the Bluetooth function, disconnect

the Bluetooth cable from the Wi-Fi adapter card.

Figure 64. Disconnecting the Bluetooth cable

Note:

The Bluetooth cable connects the Bluetooth connector on the Wi-Fi adapter card to the front USB

connector on the system board to support the Bluetooth function.

4. Remove the screw that secures the Wi-Fi adapter card.

146

ThinkCentre M79 Hardware Maintenance Manual

Содержание ThinkCentre M79


























































































































































































Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды