Lenovo ThinkCentre M79 Скачать руководство пользователя страница 56

Страница: 56 / 186

4. Click

to save the new settings.

• For Windows 8.1:

1. Open Control Panel, and click

Appearance and Personalization

Note:

For detailed information on how to open Control Panel on Windows 8.1, see “Accessing

Control Panel on the Windows 8.1 operating system” on page 51.

2. In the

Taskbar and Navigation

section, click

Customize icons on the taskbar

3. Click

Turn system icons on or off

and change the volume behavior from

Off

4. Click

to save the new settings.

Setting the volume from Control Panel

To set the computer volume from Control Panel, do the following:

1. On the Windows 7 operating system, click

Start

➙

Control Panel

➙

Hardware and Sound

. On the

Windows 8.1 operating system, open Control Panel and click

Hardware and Sound

Note:

For detailed information on how to open Control Panel on Windows 8.1, see “Accessing Control

Panel on the Windows 8.1 operating system” on page 51.

2. In the

Sound

section, click

Adjust system volume

3. Move the slider up to increase or down to decrease the volume.

Using a disc

This section provides information about the following topics:

•

“Using the optical drive” on page 48

•

“Handling and storing a disc” on page 49

•

“Playing and removing a disc” on page 49

•

“Recording a disc” on page 49

Using the optical drive

Depending on the model, your computer is equipped with one of the following optical drives:

• CD-ROM drive: Used to read CDs only.

• DVD-ROM drive: Used to read DVDs and CDs.

• BD-ROM drive: Used to read blu-ray discs (BDs), DVDs, and CDs.

• Recordable optical drive: Used to read and record a disc.

When using the optical drive, follow these guidelines:

• Do not place the computer in a location where the drive is exposed to any of the following conditions:

– High temperature

– High humidity

– Excessive dust

– Excessive vibration or sudden shock

– An inclined surface

– Direct sunlight

• Do not insert any object other than a disc into the drive.

ThinkCentre M79 Hardware Maintenance Manual

Содержание ThinkCentre M79


























































































































































































Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды