Lenovo ThinkCentre M79 Скачать руководство пользователя страница 89

Страница: 89 / 186

Invalid disc or no disc found message

Solutions:

• Ensure that a DVD disc is in the drive with the shiny side of the disc facing down.

• Ensure that video resolution is set to less than 1152 x 864 pixels.

• On computers that have a CD-ROM or CD-RW drive in addition to a DVD-ROM drive, ensure that the

DVD disc is in the drive labeled “DVD”.

Intermittent problems

Some problems occur only occasionally and are difficult to repeat.

Solutions:

• Ensure that all cables and cords are securely connected to the computer and attached devices.

• Ensure that when the computer is on, the fan grill is not blocked (there is air flow around the grill), and the

fans are working. If airflow is blocked or the fans are not working, the computer might overheat.

• If Small Computer System Interface (SCSI) devices are installed, ensure that the last external device in

each SCSI chain is terminated correctly. For more information, see your SCSI documentation.

Hard disk drive problems

Select your symptom from the following list:

•

“Some or all hard disk drives missing from the Setup Utility program” on page 81

•

“"No Operating System Found" message or the system not starting from the correct hard disk drive”

on page 81

Some or all hard disk drives missing from the Setup Utility program

Symptom: Some or all hard disk drives missing from the Setup Utility program

Actions:

• Ensure that all hard disk drive signal cables and power cables are connected correctly.

• Ensure that your computer is configured correctly to support the hard disk drives.

– If your computer is installed with five SATA hard disk drives, ensure that the SATA hard disk drive

enablement module (one to five hard disk drives) is installed.

– If your computer is installed with SAS hard disk drives, ensure that the SAS hard disk drive enablement

module (one to five hard disk drives) or the LSI MegaRAID SAS adapter is installed.

If these actions do not correct the problem, run the diagnostic program Lenovo Solution Center. See
“Lenovo Solution Center” on page 88. If you need technical assistance, see Chapter 12 “Getting information,
help, and service” on page 153.

"No Operating System Found" message or the system not starting from the correct
hard disk drive

Symptom: "No Operating System Found" message or the system not starting from the correct hard disk drive

Actions:

• Ensure that all hard disk drive signal cables and power cables are connected correctly. Refer to

“Replacing the hard disk drive” on page 114.

Chapter 8

Troubleshooting and diagnostics

Содержание ThinkCentre M79


























































































































































































Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды