Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Страница: 77 / 186

from other layers of software into electrical signals that the computer hardware can execute. You can use the
Setup Utility program to view or change the configuration settings of your computer. See “Using the Setup
Utility program” on page 63 for detailed information.
The system board of your computer has a module called electrically erasable programmable read-only
memory (EEPROM, also referred to as flash memory). It enables you to update the POST, the BIOS, and
the Setup Utility program easily. To perform such an update, you can either start your computer with a
system-program-update disc or run a special update program from your operating system.
Lenovo might make changes and enhancements to the POST and BIOS. When updates are released, they
are available as downloadable files on the Lenovo Web site at http://www.lenovo.com. Instructions for using
the POST and BIOS updates are available in a TXT file that is included with the update files. For most
models, you can download an update program that can be used to create a system-program-update disc
or be run from the operating system.
Changing the BIOS settings before installing a new operating system
BIOS settings vary by operating system. Change the BIOS settings before installing a new operating system.
To change the BIOS settings, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 63.
2. From the Setup Utility program main menu, select Exit ➙ OS Optimized Default .
3. Depending on the operating system to be installed, do one of the following:
• To install the Windows 8.1 (64-bit) operating system, select Enabled .
• To install an operating system other than Windows 8.1 (64-bit), select Disabled .
4. Select Yes in the window displayed and press Enter to confirm your selection.
5. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program”
on page 68.
Updating the BIOS from a disc
This section provides instructions on how to update (flash) the BIOS from a disc on the Windows 8.1 (64-bit)
operating system and on other operating systems.
Note: You can download a self-starting bootable disc image (known as an ISO image) with the system
program updates to create a system-program-update disc. Go to:
http://www.lenovo.com/support
To update (flash) the BIOS from a disc on the Windows 8.1 (64-bit) operating system, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 63.
2. From the Setup Utility program main menu, select Exit ➙ OS Optimized Default ➙ Disabled .
3. Select Yes in the window displayed and press Enter to confirm your selection.
4. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program”
on page 68.
5. Turn off your computer.
6. Press the power button to turn on the computer. Then repeatedly press and release the F12 key until the
Startup Device Menu window opens.
7. From the Startup Device Menu window, select the desired optical drive as the startup device. Then,
insert the disc into this optical drive and press Enter. The update begins.
Chapter 6
.
Advanced configuration
69