Lenovo ThinkCentre M79 Скачать руководство пользователя страница 13

Страница: 13 / 186

Safety notices (multi-lingual translations)

The caution and danger safety notices in this section are provided in the following languages:

• English

• Arabic

• Brazilian/Portuguese

• Chinese (simplified)

• Chinese (traditional)

• French

• German

• Hebrew

• Italian

• Korean

• Spanish

DANGER

Electrical current from power, telephone and communication cables is hazardous.

To avoid a shock hazard:

•

Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.

•

Connect all power cords to a properly wired and grounded electrical outlet.

•

Connect to properly wired outlets any equipment that will be attached to this product.

•

When possible, use one hand only to connect or disconnect signal cables.

•

Never turn on any equipment when there is evidence of fire, water, or structural damage.

•

Disconnect the attached power cords, telecommunications systems, networks, and modems
before you open the device covers, unless instructed otherwise in the installation and configuration
procedure

•

Connect and disconnect cables as described in the following tables when installing, moving, or
opening covers on this product or attached devices.

To Connect

To Disconnect

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

Chapter 1

Read this first: Important safety information

Содержание ThinkCentre M79


























































































































































































Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M79, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M79

Отзывы:

Похожие инструкции для ThinkCentre M79

Бренды по названию

Популярные бренды