Lenovo System x3550 M5 Скачать руководство пользователя страница 293

Страница: 293 / 1144

Note:

Make sure that the system board disengages from all system-board standoffs.

Step 16. Slightly push the system board toward the hot-swap fans; then, grasp the system board handles

and carefully lift it up from the chassis, being careful not to damage any surrounding components.

Thumbscrew

System board handle

Thumbscrew

System board handle

Figure 214. System board removal

Step 17. Remove the socket covers from the microprocessor sockets on the new system board and place

them on the microprocessor sockets of the old system board that you are removing.

Step 18. If you are instructed to return the system board, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you.

Attention:

Make sure to place the socket covers for the microprocessor sockets on the system

board before returning the system board.

For service technician only: replacing the system board

Use this information to replace the system board.

Important:

1. When you reassemble the components in the server, be sure to route all cables carefully so that they are

not exposed to excessive pressure.

2. When you replace the system board, you must either update the server with the latest firmware or

restore the pre-existing firmware from a diskette or CD image. Make sure that you have the latest
firmware or a copy of the pre-existing firmware before you proceed. See “Updating the firmware” on
page 33, “Updating the Universal Unique Identifier (UUID)” on page 47, and “Updating the DMI/SMBIOS
data” on page 49 for more information.

3. When you replace the system board, make sure that you remove the Integrated Management Module

Advanced Upgrade and place it on the new system board. For information about the Advanced
Upgrade, see “Using the remote presence and blue-screen capture features” on page 43.

Chapter 5

Removing and replacing components

279

Содержание System x3550 M5

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3550 M5

Отзывы:

Похожие инструкции для System x3550 M5

Бренды по названию

Популярные бренды

Lenovo System x3550 M5, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3550 M5

Отзывы:

Похожие инструкции для System x3550 M5

Бренды по названию

Популярные бренды