Applications
FlexLine, 189
9.13.5
Subapplication Check
Description
The subapplication Check is used for as-built checks. The points can be measured or
selected from the memory. The chainage and offset values are relative to an existing
horizontal alignment, and the height difference is relative to a vertical alignment or
manually entered height.
Defined chainage and Increment values will not be considered in the subapplication
Check.
Access
Press
CHECK
from the
Define Stake/Check/Slope
values screen.
P0
Instrument station
P1
Target point
P2
Target point
a
Horizontal alignment
b
Chainage
c+
Offset, positive
c-
Offset, negative
d+
Height difference, positive
d-
Height difference, negative
a
P1
P2
c+
d+
b
c-
d-