Applications
FlexLine, 209
Next step
Close the traverse by selecting
CLOSE
in the
Sight Foresight
screen after a
backsight point measurement, but before the foresight point measurement.
Measure
Checkpoint
By measuring a check point it is possible to check whether the
Traverse is still within certain deviations. A check point is
excluded from the traverse calculation and adjustment,
however, all measurement data and results observed from a
check point are stored.
1. Enter the name of the check point and the height of the
reflector.
2. Press
OK
to go to the next screen.
3. Measure the check point. The differences in Easting,
Northing and Height are displayed.
A message will appear if the tolerances defined in the
TraversePRO configuration are exceeded.
Field
Description
