Applications
FlexLine, 149
AREA & DTM
VOLUME
The graphic always shows the area projected onto the reference plane. The points
used for defining the reference plane are indicated by a .
The breakline points must be located within the boundary of the defined area.
Area calculation
The 2D and 3D areas are calculated automatically and displayed once three points
have been measured or selected. The 3D area is calculated automatically based on
the following;
•
The system will use the three points which cover the largest area.
•
If there are two or more equal largest areas, the system will use the area with
the shortest perimeter.
1PtBACK
To undo measurement or selection of
the previous point.
RESULT
To display and record additional
results (perimeter, volume).
BreakLn
To measure or select points on the
breakline. These points are then used
to calculate a volume.
Def. 3D
To manually define the sloped refer-
ence plane by selecting or measuring
three points.
