Applications
FlexLine, 197
9.13.7
Subapplication Check Slope
Description
The subapplication Check Slope is used for as-built checks and to get information
about slopes, for example on a natural surface. If the parameter offset left/right and
height difference are not entered, the point on the horizontal alignment is the hinge
point.
Defined chainage and increment values will not be considered in the subapplication
Check.
Access
Press
CH-SLP
from the
Define Stake/Check/Slope
values screen.
P1
Measured point
a
Horizontal alignment
b
Defined offset
c
Defined height difference
d
Hinge point
e
Actual slope
f
Natural surface
g
Offset to hinge point
h
Offset to alignment
i
Height difference to hinge point
j
Height difference to alignment
TSOX_055
e
f
a
c
b
h
i
j
g
d
P1