Group 8
Job Editor
Page 137
JET3up
Release R1.06
Proceeding for resetting to factory settings:
Press on the tab
<Factory Settings>
(2)
to select the tab.
Press the button
<Reset>
(9)
.
A
Conformation prompt (10)
if you would like to continue with the process is
displayed. Press the button
<Cancel>
(12)
to abort the process or press the
button
<OK>
(11)
to reset the device.
The message
<Restart>
(13)
is displayed.
Press the button
<OK>
(14)
. The device is shut down automatically and will
be rebooted afterwards. After this process the JET3up is reset to the standard
settings.
Options
Products per minutes
If this check box is selected the speed indicator in the main window of the printer
displays the current speed as products/minute instead of m/minute.
The products per minutes are calculated on the basis of 2-second measuring
intervals during which the PrintGo signals are counted. The displayed speed is an
average value of all values calculated within the last 60 seconds. Therefore it may
take up to 1 minute until a stable value is reached. The calculation is restarted with
each Print Start command.
Buzzer off
If this check box is selected there will be no buzzer sound in the case of warning
and error messages.
Attention
Switching the buzzer off may be affect printer safety!
There is a risk of not recognizing a critical situation fast enough!
Make sure that warning and error messages are always recognized in a
timely manner.
IP 65 Machine
This check box is only selected with printers that have the IP65 option. The check
box can only be selected by LEIBINGER service staff or service staff authorized by
LEIBINGER.
Direct printstart
If this check box is selected the printer will switch to
Print Start
mode as soon as
the nozzle is opened.
In combination with the Auto start option it is possible to get the printer from
stand-by
mode to
Print Start
mode with just one touch.
Содержание JET3 up
