Leibinger JET3 up, Руководство по эксплуатации

Страница: 137 / 412

Group 8 Job Editor Page 135
JET3up Release R1.06
Proceeding:

Press on the tab
< Interfaces> (2)
to select the tab.

Press on the arrow key of the drop-down list <Encoder Settings> (3) . The
drop-down list opens for selection.

Now select the required interface.

If required activate now the bounce time delay by clicking on the check box (4) .
An activated delay is displayed by
√
in the check box.
Figure 50 Select encoder interface
Bounce time delay is switched off Bounce time delay is switched on
1 –Dialog box <Basic Settings> 3 – Drop-down list <Encoder settings>
2 –Tab < Interfaces> 4 – Check box <Bounce time delay off>
Pos. Interface Describtion
1. RS422 5V / 4 Signals (A,
Ā , B, B)
2. TTL 5V TTL / 2 Signals (A, B)
3. HTL 24V / 2 Signals (A, B)
2
1
3
4