Leibinger JET3 up, Руководство по эксплуатации

Страница: 219 / 412

Group 8 Job Editor Page 217
JET3up Release R1.06
2. Deletion of graphic elements:
(Example: On side of a rectangle and a complete line shall be deleted)
Proceeding:

Start with the deletion of the line.

Select the <Selection> tool (2) from the the <Function> drop-down menu
(1) .

The selection frame is defined by two corner points (3) and (6) . Place the
corner points in a way that the selection frame covers the line to be deleted.

The <Coordinates> indicator (4) displays the respective positions of the
corner points. The <
Status bar for the current tool
>
(5)
provides
information for each step.

Select the <Delete> tool (8) from the <Edit> drop-down menu (7) .

The line covered by the selection frame will be deleted.

In the next step one side of the rectangle will be deleted.

Select the < Selection > tool (2) from the < Function > drop-down menu (1) .

Define the first corner point for the selection frame (11) . At this point the
contour of the rectangle will be interrupted. This point will be marked red.

Define the second corner of the selection frame (12) . This point is positioned
just one dot below the first corner point. Actually this results not in a
selection frame but in a selection line.

Select the <Delete> tool (8) from the <Edit> drop-down menu (7) .

The part of the rectangle covered by the selection frame will be deleted.