Leibinger JET3 up, Руководство по эксплуатации

Страница: 304 / 412

Page 302 Job Editor Group 8
Release R1.06 JET3up
The height of the printout of the selected bar code type is defined with the <Bar
height> (6) setting. The height is measured in dots. The JET3up printer is able to
print up to 32 dots in vertical direction. Therefore <Bar height> can be set to a
value between 0 and 32.
Bar code type code 39 with
different
<Bar height>
settings.
The height of the plain text
depends on the selected
font. In this example it is a
7x5 font.
Pushing the <Default Settings> button (8) will open the <Barcode Format Default
Settings> dialog box (10) . In this dialog box the default settings for the 3 preset
<Styles> can be adjusted. There is a tab for each <Style> (11-13) . All changes
confirmed with the <OK> button will be applied to the <Style> settings in the
<Barcode format> dialog box. The <Cancel> button will close the dialog box
without changes.
For 2-D bar codes like the ECC200 code the <Barcode format> dialog box (14)
offers different options. For 2-D bar codes there are 3 <Styles> available (15) .
With the styles the number of printed dots which are used per 2-D code square is
defined.
<1x1> <Style>: one square of the 2-D code is printed with 1 dot (16) .
<2x2> <Style>: one square of the 2-D code is printed with 4 dots (17) .
<3x3> <Style>: one square of the 2-D code is printed with 9 dots (18)