Leibinger JET3 up, Руководство по эксплуатации

Страница: 123 / 412

Group 8 Job Editor Page 121
JET3up Release R1.06
Basic rules for the job list type <Job Organisator>:

The printout of the complete job list including all repetitions is started with
one
<PrintGo> signal.

A single print job of the <Job Organisator> job list can be edited directly in
the joblist editor. A click on the <Job edit> button will open the currently
selected print job in the <Job Editor> . After changes are saved in the <job
editor> leave the <Job Editor> with the <Close> in order to return to the
joblist editor.

All distances assigned to print jobs on the job list are related to the same
reference point. The reference point is set with the
<PrintGo> signal.

If a distance assigned to a job is shorter than the sum of all distances and
print jobs lengths coming before that job no error message occurs. The too
short distance will just be ignored and the printout will start right after the
last print job.
Too short distances between the print jobs on the job list, too
short distances for print jobs will lead to wrong distances for defined print
job repetitions!

For the <PrintGo distance> which is defining the printout distance for
repetitions the same reference point is used as for the distances assigned to
the print jobs on the joblist. For each additional repetition the <PrintGo
distance> is added up respectively. Here also all defined distances will be
considered.

If the
<PrintGo distance>
of the job list is shorter than one complete
printout of the job list no error message occurs. The too short distance will
just be ignored and the printout of the repetition will start right after the last
printout.

The WYSIWYG preview of the main window always shows the print job that
will be printed with the next
<PrintGo> signal (14) .