Leibinger JET3 up, Руководство по эксплуатации

Страница: 203 / 412

Group 8 Job Editor Page 201
JET3up Release R1.06
The font editor is started from the main window of the printer. To start the font
editor choose the respective menu item from the drop-down menu (3) :
<Extra>-<Editors>-<Font editor> .
The user interface of the font editor consists of various components:
Menu bar
With the drop-down menus of the menu bar (4) you can select various commands,
options and tools. The following drop down menus are available:
Options <File> menu Options <Edit> menu Options <Func.>menu Options <View> menu
File: The <File> menu provides all standard operations for file handling:

New (1): A new font file is created. In a first step you will have to
define the size of the editor and the grid (measured in dots)

Open (2): Opens a standard file dialog box to open a stored font
from the file system (hard disk, SD-card or USB-stick)

Save (3): Saves the current file. If the current file is still unnamed a
standard file dialog box will open and you will have to specify the
file name and the storage location

Save as (4): Opens a standard file dialog box to save the current
file. You will have to specify the file name and the storage location

Close (5): Closes the current file. If there were made any changes
to the file you will be asked whether you like to save them.
Edit: The <Edit> menu provides several standard commands for drawing
objects:

Cut (6): Cuts out a selected area (see: <Function>-<Selection>)
and stores it in the clipboard until you use the <cut> or <copy>
command again.

Copy (7): Copies a selected area (see: <Function>-<Selection>)
and stores it in the clipboard until you use the <cut> or <copy>
command again.

Paste (8): In the status bar of the drawing area you will be asked to
place the cursor in the upper left corner of the drawing area but this
is not mandatory.
1
2
3
4
5
7
8
9
6
13
14
15
12
10
11
16
17
18
19
20