Leibinger JET3 up, Руководство по эксплуатации

Страница: 218 / 412

Page 216 Job Editor Group 8
Release R1.06 JET3up
7.5.6.8 Create and process graphic elements
1. Creation of graphic elements:
Example: A rectangle shall be created
Proceeding:

Select the
<Rectangle>
tool
(2)
from the the
<Function>
drop-down menu
(1) .

Click on the drawing area at the position of the first corner of the rectangle
(3) .

This point is marked red. The position is displayed by the <Coordinates>
indicator
(4).
In the
<status bar for the current tool > (5)
the next step is
displayed.

With a click on the position of the second corner of the rectangle (6) the
rectangle will be created.
Figure 102 Graphic editor (Create a bitmap)
1 – Drop-down menu <Function> 4 – <Coordinates> indicator
2 – <Rectangle> tool 5 – <Status bar for the current tool>
3 – First corner of the rectangle 6 – Second corner of the rectangle
1
3
5
2
4
6