Laversab 6600-NG Скачать руководство пользователя | Manualshive

Страница: 99 / 103

background image

6600-NG User’s Manual

125-9110A

Page 99

APPENDIX E : WI-FI OPERATION

This section includes the process for setting up a wireless Remote, such as an iPad, with the appropriate App
for use with the 6600-NG.  The wireless Remote will function only if the 6600-NG has been installed with the
optional wireless capability.

The wireless antenna is located on the Top Panel of the tester, as shown in Figure 2.1.  Care must be taken not
to  obstruct  or  cover  the  antenna  with  metallic  objects,  since  this  will  be  detrimental  to  effective  Wi-Fi
operation.

Note: The Wired-Remote must be connected to the tester and operational even when the iPad is being
used.

E.1

iPad COMPATIBILITY

The Laversab App is compatible with the following iPads configured with iOS 8.1 or higher:

iPad 2, iPad Mini, iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Air 2, iPad Pro.

E.2

DOWNLOADING THE APP

The Laversab App must be downloaded from the Apple App Store.   Although the App itself is provided at
no  charge,  a  credit  card  is  required  to  create  an  Apple  Store  account  which  enables  you  to  access  and
download the App.

Once you have access to the App Store, search for “Laversab” and the app should appear with the icon as
shown below.  If more than one App is displayed, select the App labeled “CH-3 / vx.xx”, where ‘x.xx’ is the
version  number.    If  more  than  one  version  of  the  App  is  displayed,  select  the  one  with  the  latest  version
number.  Do not select the App labeled “CH-2 / vx.xx”, since this is intended for use only with a 2-Output
tester.

E.3

NETWORK SELECTION

Once the App has been installed on your iPad, the following steps need to be performed to connect to the
tester through the App.

a.

Turn ON the tester and ensure that the Wired-Remote is displaying the Main Screen. The
internal wireless access-point will now be active.

b.

On the iPad select the ‘Settings’ icon. Then select the Wi-Fi section. (See Figure E.1 below). The
right side will show all the Wi-Fi networks available. One of the networks will be labeled “LAV-
xxxxx”, where ‘xxxxx’ is the serial number of the tester you want to connect to.

c.

Select the network with the correct label, ensuring that the serial number matches the serial
number of your tester. The serial number of the tester can be found on the label placed on the
inside of the lid of the tester’s case, towards the bottom right corner.

«
...
97
98
99
100
101
...
»

Содержание 6600-NG








































































































Отзывы:

Нет отзывов

Похожие инструкции для 6600-NG

Бренд: Tascam Страницы: 8

Бренд: B-K lighting Страницы: 5

Бренд: B-K lighting Страницы: 4

Бренд: B-K lighting Страницы: 3

Бренд: Campbell Страницы: 2

Бренд: Hammer Страницы: 42

Бренд: Hach Страницы: 66

Бренд: Hach Страницы: 14

Бренд: Hach Страницы: 144

QuikChem 8500 2 Series

Бренд: Hach Страницы: 80

Бренд: Hach Страницы: 178

Бренд: Hach Страницы: 32

Бренд: hager Страницы: 4

Бренд: Hacker Страницы: 2

Бренд: J.P. SELECTA Страницы: 8

Бренд: Haemonetics Страницы: 134

Бренд: Hadeco Страницы: 72

Бренд: Madrigal Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды