Laversab 6600-NG, Руководство пользователя

Страница: 28 / 103

6600-NG User’s Manual
125-9110A Page 28
The fields for Pt units, Pt target and Pt-Rate target will be blinking. The Actual and Target values will be
based on the selected unit. To activate units of QcinHg, press
GO . To revert back to the original units,
press CANC .
If Target values (or any other Pt, Ps1 or Ps2 parameters) need to be changed, they can be changed before
pressing
GO . When GO is pressed, the blinking stops and units of QcinHg becomes activated.
Figure 3.5 : Select knots
Ps1 units
Ps1 units can be changed only if the key# symbol
(5) is displayed to the right of the Ps1 units field. Press
key ‘ 5 ’ on the keypad and the Lower section of the display will appear as shown in Figure 3.6 below.
Figure 3.6 : Select Ps1 units
The seven Ps1 units are shown on this screen. Press the key with the # (shown in blue) associated with
the unit to be selected. For example, if units of inHg is to be selected, in the ‘Ps1 units’ screen, press ‘
3 ’.
The Lower section will blank out and the Upper section will appear as shown in Figure 3.7 below.
Ps1 units
1) Feet 4) mbar 7) kpa
2) Meters 5) psi
3) inHg 6) mmHg
Press CANC to exit
3.9
20.0
Pt inHg
Pt Ps2 Ps1
Measure
knots/min
0.0
150.0
inHg inHg
29.9213 29.9213
knots
30.0000 30.0000
inHg/min inHg/min
0.000 0.000
4.000
4.000
Measure Measure
1
2
3
4
9
0
.
±
6
7
8
5
AC
92%
Hide/Show Ps2
000
Messages