Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 56 / 157

56
which stands for motion detection recording. The following
figure shows an example.
Motion Detection Snapshot
Motion detection snapshot is similar to motion detection
recording. Enable and configure motion detection alarm first (see
steps 1 to 3 in
Motion Detection Recording for details), and then
proceed with the following steps.
1.
Set motion detection snapshot under Alarm > Motion: click
right to
Trigger Actions
. In the window displayed, click
the Snapshot tab, select the desired camera, and then click
OK .
2. Set a snapshot schedule under
Storage > Snapshot.
For the
detailed steps, see Draw or Edit a Schedule . Make sure the
schedule type is Motion .
Alarm Triggered Recording and Snapshot
Set input alarms to trigger recording and snapshot. See Alarm
Input and Output for more details.
Alarm Triggered Recording
1. Click
Alarm > Input/Output > Alarm Input.
2. Set alarm input: click for the desired camera. In the
window displayed, select Enable , select N.O. (normally open)
or N.C. (normally closed) trigger mode, and then click OK .