Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 75 / 157

75
NOTE!
To apply the same settings to other cameras, click Copy , select
cameras, and then click OK .
Motion Detection
When enabled, a motion detection alarm occurs if an object
inside the detection area moves to certain extent, and an alarm
icon appears in the upper right corner.
Motion detection is enabled on the NVR by default. Unless
modified, the detection area covers the full screen, and recording
is triggered only for the current camera. The settings remain if you
disable motion detection and then enable it.
1.
Click Alarm > Motion.
2. Select the desired camera and then select Enable to enable
motion detection.
3. Use the mouse to draw a detection area, and drag the slider
to set detection sensitivity, target object size, and duration.
The higher the sensitivity, the more likely a moving object
will be detected.
4. Click right to Trigger Actions and set action(s) to trigger.
For more details, see Alarm-Triggered Actions .