NVR-NDAA-POE-4CH
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
54
of
1
57
\
I
le---- I
I
I
I
I
I
I
\
I
The dotted lines indicate the cable
connection side (may vary with device) .
Make sure the disk faces the correct side
for installation.
Choose an option as appropriate. Use a 1# or 2# screwdriver as needed. All photos
are only for illustration.
0
1 or 2 HDD Installation
1. Loosen screws on the rear panel and both sides. Remove the cover.
2. Connect data and power cables
to the disk.
3. Loosen screws on the disk halfway
4.
Slide the disk in the screw holes.
5.
Tighten the screws.
6. Connect the power cable to the
7. Connect the data cable to the
motherboard.
motherboard.
8.
Put the cover back in place and tighten the screws.
0
4 or
8
HDD Installation
1.
Loosen screws on the rear panel.
2.
Press with both thumbs and slide
open the cover.
3.
Loosen screws on both sides.
4.
Take out the mounting plate.
5.
Secure disks on the mounting
6.
Place the mounting plate back in
plate and tighten the screws.
place.
7.
Tighten screws on both sides to
8.
Connect power and data cables
secure the mounting plate.
to the disk.
9.
Connect the data cable to the
10.
Put the cover
'
back in place.
motherboard.
Tighten screws on the rear panel.
0
Take Mounting Bracket as an Example
1.
Identify the left and
right mounting brackets.
2.
Fix the disk to the mounting
brackets.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...