NVR-NDAA-POE-4CH
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
56
of
1
57
0
Startup
Verify installation and cable connection are correct. Connect to power and then turn on the power on/off switch (if applicable). Follow the wizard to complete the
basic setup after the NVR starts up.
0
Live View
Click
Menu >Camera> Camera.
The discovered cameras are listed. Click
to add
a camera. To search a network segment, click
Search.
If a camera is added
but live video is not available, check network connection and make sure the correct camera username and password are set in the system. Modify if necessary.
0
Playback
Right-click a preview window and then choose
Playback
to view video recorded on the current day. A 24/7 recording schedule is enabled at delivery and can be
edited under
Menu> Storage> Recording .
0
Access Using a Web Browser
Access the NVR using a Web browser (e.g., Internet Explorer) from a connected
computer.
1.
Enter the NVR's IP address in the address bar and then press
Enter.
Install the
plugin as,pr.9 mpted. Close all Web browsers when the installation starts.
2.
Open the Web browser and log in with the correct username and password.
0
Access from Mobile App
Scan the QR code on the NVR device to download the mobile app. Install the app and sign up for a cloud account. Use the app to scan the QR code again to add
the NVR. And then you can access your NVR from your mobile phone anytime anywhere .
Note:
Make sure your NVR is connected to a router with Internet connection. If the app is not available by scanning the QR code, please contact your local dealer.
0
Shutdown
Use the
Shutdown
menu instead of by disconnecting power or turning off the power on/ott switch. A sudden power failure may cause device damage and
loss of data.
11
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...