114
NOTE!
Disk property can be edited if the disk is used for
recording/snapshot.
The
Redundant property is available to certain NVR models.
You may use external eSATA disks for recording/snapshot or
backup purpose and unmount them if necessary. eSATA
disks and NAS disks cannot be used to create arrays.
4.
To format a disk, select the disk and then click
Format
. When
a confirmation message appears. Click
Yes
.
NOTE!
Local disks will be formatted automatically when installed.
Extended disks will not.
Format a disk with caution. All data will be removed.
Array Configuration
Only certain NVR models support RAID. The table below lists the
supported RAID types and hard disks required.
RAID
HDD Qty
RAID 0
2-8
RAID 1
2
RAID 5
3-8
RAID 6
4-8
RAID 10
4-16 (Must be an integral multiple
of 2, e.g., 4, 8, 10, etc).
RAID 50
6-16
RAID 60
8-16
Enabling RAID
You need to enable RAID first.
1.
Click
Storage > Array.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...