Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 155 / 157

NVR-NDAA-POE-4CH
Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 1 55 of 1 57
3.
Choose a way as appropriate to detach the front panel.
Loosen the screws to detach the
front panel.
Press the latches on both sides to
detach the front panel.
"
4.
Align the disk with the slot, insert
5.
Install all disks in the same way
and push gently till it clicks in
position.
and then install the front panel.
0 Ports, Interfaces and LEDs
The ports, interfaces, connectors, power on/off switch and LED indicators may vary with device model. See the following two examples.
eSATA interface --------
----- RS232 (for maintenance)
CVBS output
�
•
-=
==
=
I
F
Alarm input/output
C '
7
�
1
� , �
=
�
AC
=="':::='
powe r
,,,::,�:,:: (@r�1
: t � � """'
HDMI output
USB
VGA output
,__ _________ HDMI output
LED Description
PWR(Power) Steady on: Connected to power.
RUN(Operation)
•
.
Steady on: Normal.
Blinks: Starting up .
NET(Network) Steady on: Connected to network.
GUARD(Arming) Steady on: Arming is enabled.
.
IR
.
Steady on: Activated for remote control.
Blinks: Authenticating device code.
ALM(Alarm) Steady on; Device alarm occurred.
CLOUD Steady on: Connected to cloud.
HD(Hard disk)
One HD LED only:
.
Steady on: No disk; or disk is abnorma l. ·
.
Blinks: Reading or writing data .
One HD LED for each disk:
.
Steady green: Normal .
.
Blinks green: Reading or writing data .
.
Steady red: Abnormal.
.
Blinks red: Rebuilding array .
...