Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 46 / 157

46
2. Add presets.
a. Click the directional buttons to steer the PTZ camera to
the desired position.
b.
Adjust the zoom, focus, and iris as needed.
c. Select a preset number not in use, and then click
under Edit .
d. Repeat the above steps to add all the presets.
3. To call a preset, click for the corresponding number. The
camera rotates to the preset position.
NOTE!
Presets can also be triggered by alarms. See Alarm-Triggered
Actions for details.
Setting a Preset Patrol
Set the PTZ camera to patrol by presets (go from one preset to the
next in specified order). Set presets first and then select some as
keypoints.
Up to four patrol routes (Preset Patrol 1, 2, 3 and 4) are allowed
for each PTZ camera. Each patrol route can have up to eight
presets (keypoints).
After setting presets, follow the steps to set a preset patrol. The
following uses preset patrol 1 as an example.