115
2.
Select the check box to enable RAID. A confirmation message
appears. Click
Yes
.
Creating an Array
It is recommended to configure a hot spare disk to ensure reliable
system operation and successful rebuilding in case an array fails.
1.
Click
Storage > Array.
2.
To create an array automatically, click
One-click Create
.
NOTE!
There is no need to select disks when creating an array with
One-click Create
. The system identifies all usable disks. RAID
1 is created when two disks are available. When three or
more disks are
available, RAID 5 is created. If more than four
disks are available, a global hot spare disk will be created.
Arrays created in this way are named ARRAY
x
, for example,
ARRAY1, ARRAY2.
3.
To create an array manually, select the desired disks and
then click
Create
. In the window displayed, enter the array
name, select the array type, and select local disks. Click
OK
to complete the setup. Note that no hot spare disk will be
created automatically. Make sure all disks are selected to
create array(s); otherwise, disk space will be wasted
(because disks that are not selected will not be used for
storage).
Rebuilding an Array
By checking array status you can determine whether maintenance
is necessary.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...