142
2
Login
1.
Open a Web browser on your PC and browse to the login
page by entering the IP address (
192.168.1.30
by default) of
your NVR.
You may need to install a plug-in as prompted at your first
login. Close the Web browser when the installation starts.
2.
In the login dialog box, enter the correct username and
password (
123456
for admin) and then click
Login
.
CAUTION!
The default password is intended only for your first login. We
strongly recommend you set a strong password to ensure
account security.
Strong: contains at least 8 characters from at least three of
the four character types: upper-case letter, lower-case
letter, special character, and number.
Medium: contains at least 8 characters from two of the four
character types: upper-case letter, lower-case letter, special
character, and number.
Weak: contains less than 8 characters from only one of the
four types: upper-case letter, lower-case letter, special
character, and number.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...