30
NOTE!
First you need to enable port mapping at
Setup > Port > Port
Mapping
on the IP device's Web interface.
1.
Click
Camera > Camera,
click
Custom Add
.
2.
Choose an option:
By IP
a.
On the IP device's Web interface, go to
Setup > Port > Port
Mapping,
find the external IP (public IP) and external port
number.
b.
On the NVR: Select a protocol, enter the above-
mentioned IP address and port number, enter the
username and password.
c.
Click
OK
.
By MyDDNS
a.
On the IP device's Web interface, go to Setup > Network >
DDNS, enable DDNS, select MyDDNS, set a domain name and
get the server address.
NOTE!
After setting the domain name, check that you can use the
device address to access the IP device's Web interface.
Make sure the MyDDNS server and the NVR are connected
(ping the MyDDNS server from the NVR).
b.
On the NVR: Select a protocol, enter the above-
mentioned server address, domain name, username and
password.
c.
Click
OK.
By a domain name
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...